Learn More About Your Boats Systems By Joining The Born Again Boating Academy! https://www.bornagainboating.com/
Get Your Born Again Boating Clothing! https://www.bornagainboatingshop.com
Get Savings On Boat Parts With BAB Coupons At Partsvu Here:
https://shareasale.com/r.cfm?b=1991037&u=3159438&m=119617&urllink=&afftrack=
Please Buy Anything From This Link To Amazon & Help Us Keep Bringing You Content!!!! https://www.amazon.com/?&_encoding=UTF8&tag=bornagainboat-20&linkCode=ur2&linkId=97bb1968e1ac47dfc3703d401d95fb5a&camp=1789&creative=9325
Show More Show Less View Video Transcript
0:00
which Mark has stated
0:03
I've had a problem with acrylic paint and clear coat. It can crack
0:08
You don't have that problem with enamels. I find I painted a Suzuki Caling and the clear cracked on it
0:14
So if you use an acrylic-based clear coat, it's going to crack
0:20
It's going to look terrible. And there are some marine branded clear coats that are acrylic
0:28
So make sure you don't use a clear coat. acrylic. I'm not sure what exactly the right term would be to call it, but make sure it's not
0:36
acrylic because acrylic will crack and that's what's going to make it look bad. So the paint underneath
0:42
is going to look good, but you'll have cracking all over the top of it because of the clear coat
0:47
and it'll probably cloud up and discolor as well because of the heat and the sun and stuff like that
0:53
you know, being an outboard sitting in the sun and being used and it heats up. So that's the only thing
0:59
but if you've got a bigger outboard, I would say you're going to be closer to four to five cans
1:08
So if you are going to paint the entire lower unit with the drive shaft housing, your chaps and the cowling itself
1:18
on like say a 300 you going to need probably four or five cans of primer and then you going to need four to five cans of paint
1:31
and then probably four cans of clear coat, maybe even three. Clearcoat you can usually get away with a little bit less
1:39
because it covers so well, especially that molar. I was very impressed
1:43
That was expensive stuff, but at the same time, it covered really well
1:47
And so that would be what I would say to do as far as how many cans you're going to need to paint the entire engine
1:54
Greg D. Skioto, great video. Thank you, Greg. Question, please. You mentioned you must paint the lower unit
2:04
Does this pertain to salt water applications only? My mercury only sees fresh water
2:08
Thanks. I would say yes that it does pertain to pretty much anything
2:14
because, I mean, you still have anodes and they still do a purpose because of the way you're using your engine
2:22
But if you don't really use your boat that much, you're not really going to see any problems with it in freshwater
2:28
But if you use it quite often, the more time that you have the lower unit with the bracket and, you know
2:35
the battery on and everything in the water using it the dissimilar metals of the aluminum the steel bolts the anodes and then the grounding and electricity running through all the metal because you using it All of that is going to be corroding when you use it
2:56
And so the more surface metal that is in the water, the more it's going to corrode
3:02
So I would say yes, you should paint it. If you don't use it that much and you're always grounding it
3:08
you're probably never going to see a problem in freshwater. but if you use it a lot and you have a large area of the lower unit that has got all the
3:19
paint missing, then yeah, I would probably paint it. You can take the prop off and leave it on the boat, sand it up, because if you're running
3:28
real skinny in rivers and rocks and sand and grass, all that kind of stuff, and you're
3:32
wearing the paint off really quickly, then I would say to leave the prop, you know, take the prop
3:38
off, leave the lower unit on the boat, and then just tape it off, you know, right above
3:43
wherever you're wearing the paint off very heavily, and then scratch it up, paint it while
3:48
it's on there. You could do it once every other year, and I mean, that's what I would say
3:56
But then you've also got other options like Daniel Davis says put some bedliner on it
4:02
So there are people that will put like bottom paint or bedliner on the lower unit It does create drag because bedliner and bottom paint is more like textured So it will eliminate growth but it does create drag
4:18
So it will slow it down. You might not ever see any kind of difference depending on the engine
4:23
I mean, if you're running a 50 horse outboard on a 1,200 pound boat, then bedliner on
4:30
the lower unit, you're not going to see any difference in your speed. But if you are, you know, running something
4:37
like a bass boat or something like that, and you paint that lower unit
4:41
you might see, you know, a mile or two taken off of your top end just because of the drag of the lower unit
4:49
which, you know, you wouldn't think about it, but it will do that with a textured type of paint
4:54
like a bedline or something like that. The texture creates drag in the lower unit
4:59
That's what, you know, that's why you have different gear ratios as well, which we'll talk about that in a different video
5:05
but like, you know, different lower units are smaller, skinnier, different shapes because it creates drag
5:13
That's one of the things that's in the water. And so if you're on a bass boat and you put thousands of dollars into getting, you know, 96 miles an hour and you put bedliner on that lower unit, you might go down to 94
5:27
I don't, you know, what it'll actually do? Not 100%. Now, if you like this video, you can watch the full episode over here or you can watch another clip
5:35
over here
Boats & Watercraft
Vehicle Repair & Maintenance
Boating
People & Society


