0:00
Sean Russell, any parts that you would strictly go with OEM or generally look at all options
0:06
Talking about where we had the problem with the fuel pump on the little bully netter and
0:11
it ended up frying our ECU. Now for this, I would definitely say like sensors and stuff like that
0:19
I'm going to try and stick straight OEM. Like I'm going to be OEM across the board, but when it gets into this bigger stuff like
0:27
the fuel pump, stuff like that. I mean, you're talking huge price differences from an $800 pump to a $78 pump
0:35
So I would, I'm generally going to be looking at all options, but I'm going to be sticking
0:39
as close to OEM as I possibly can, even on oil filters and stuff like that
0:45
I try and, you know, put Yamaha, you know, and water separators too, like using a quality
0:52
water separator. So Ray course over like Sierra and sea choice stuff like that
0:57
And even, you know, the Yamaha water separators, the mercury water separators, I try and stick
1:02
with OEM stuff altogether just because it seems like a better product
1:07
Now oil filters, same thing. Like I was saying, I would stick with the OEM
1:12
Also the sensors now a lower unit. So you got SCIs and OBRs that can save you a ton of money if you blow a lower unit, but
1:22
they only make certain models, certain stuff. So I would, I ran an SCI for three years on my Yamaha OX66
1:32
So it definitely will save you quite a bit of money on that aspect, lower unit wise
1:39
But yeah, alternators, starters, sensors. I pretty much try and stay OEM
1:48
I don't really go much into the trial world of the aftermarket stuff
1:52
Austin Hall, where do you like to get parts aside from eBay and Amazon
1:57
I really will shop around. So knowing local dealers, marinas, having, you know, relationships with different places
2:07
like that and I'll shop it around. So Amazon, eBay, marketplace, I don't really find much off Craigslist, but the marinas
2:16
that I know, and then also partsview.com, boats.net.com or boats.net. And I will basically, you know, shop around and see who's got the best rate and all that
2:29
kind of thing. So those are my top places, but the marinas, usually I have relationships with places to
2:39
where I can get deals on stuff and they all have accounts with Land and Sea, Donovan
2:43
Port Supply, and the major manufacturer distribution centers. So usually I kind of go that route over eBay and Amazon
2:53
Greg says the fuel pump is probably the most common part people cheap out on with an aftermarket parts
2:59
There is a reason that OEM is five times the cost as the cheap one
3:04
And yeah, that's pretty much it. I mean like the fuel pump is what everybody goes for an aftermarket pump because you're
3:09
talking not five times, but seven times in some situations, like, you know, from a $50
3:15
pump to an $800 pump is a big jump. And yeah, that is one of the problems that I would say is that the problem that I had
3:25
was the amp draw, but you kind of live and learn on that situation there
3:29
So if you like this clip and you want to watch another one, you can see another one over here or watch the full episode over here